LevelOne 10/100M 32bit Fast Ethernet PC card User Manual
Page 11
Hardware installation
9
Ejecting the LevelOne 10/100Mbps 32bit Fast
Ethernet PC Card
After you have disconnected the RJ-45 connectors, you can eject
the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card from the
notebook’s PC Card slot.
Note!
In Win 95/98/2000/ME operating systems, you do not
have to power down the notebook to remove the card.
The card is hot-swappable—you can remove the card
when the notebook is powered on. However, Microsoft
recommends that you stop the card. Refer to your
Windows 95/98/2000/ME online help for information on
stopping the LevelOne 10/100Mbps 32bit Fast Ethernet
PC Card.
Most notebooks have an eject lever or button for ejecting PC cards
from the PC slots. Consult your notebook’s user’s manual for
details.
Warning!
To prevent data loss, do not eject the LevelOne 10/100Mbps
32bit Fast Ethernet PC Card when a data transmission is
taking place. Exit your communications program normally,
stop the card if necessary, and then remove the card.
This concludes Chapter 2. The next chapter covers driver
installation for Windows 2000/98/95/NT/ME operating systems.