LevelOne 10/100M 32bit Fast Ethernet PC card - Manual (Page 45)

Installation for LINUX
43
Chapter 5
Installation for LINUX
This device driver has been fully tested on the following platforms:
Slackware 3.6
Slackware 4.0
Slackware 7.0
Slackware 7.1
Redhat 5.2
Redhat 6.0
Redhat 6.2
The complete file list is as follows:
README
makefile
rtl8139.c
en0100r.o
Before Installation
Before you start rebuilding the driver, you must have PCMCIA binaries
and source installed in your system. PCMCIA module version 3.0.9 or
later are quaranteed to work well with this driver. Latest version of
PCMCIA module is available at
ftp://sourceforge.com . Also, if you