English – Jabra SP700 User Manual
Page 15
14
english
Jabra SP700
I want to reset the pairing list on my speakerphone
- The speakerphone registers a list of up to 7 mobile phones . To
remove the list, press and hold the answer/end button, volume
up button and fm button at the same time . a beep indicates
the list was removed from the speakerphone memory . The
next time you power on, the speakerphone will go into pairing
mode as the first time you powered your new SP700 on .
Will the Jabra SP700 work with other Bluetooth equipment?
- The Jabra SP700 is designed to work with bluetooth mobile
phones . it can also work with other bluetooth devices that are
compliant with bluetooth version 1 .1 or higher and support a
headset, hands-free and/or advance audio distribution profile .
I cannot use Reject call, call on hold, Redial or voice dialing
These features are dependent on the ability of your phone to
support a hands-free profile . even if the handsfree profile is
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices . Please consult
your device manual for details .
I can not connect speakerphone and radio via FM transmitter
- make sure the radio is turned on and speakerphone is in fm
mode (fm Status icon is on) .
- if your radio when searching is not able to find the fm fre-
quency set by your speakerphone, the fm frequency must be
tuned in manually on the radio . Please read radio manual to
find out how to manually change frequency on your radio .
- The sensitivity of the search function on your radio determines
whether it is able to find the frequency set by your speaker-
phone . on some radios you are able to adjust the sensitivity
thus making it possible to find the speakerphone frequency
when searching . if not tune in manually .
- in urban areas it might be difficult to find a clear frequency . it
is therefore advisable to use a frequency in the lower or upper
end of the fm frequency band (e .g . 88 .1 or 107,7 mhz) where
you will have the best chance to find a clear frequency .