Bedrails (if equipped), Bed extender (if equipped), Driver controls – Lincoln 2008 Mark LT User Manual

Page 113

Advertising
background image

10. Remove tailgate from left side hinge by sliding tailgate to the right.

To install, follow the removal procedures in reverse order.

BEDRAILS (IF EQUIPPED)
• This bedrail is for appearance use only.

To help prevent injury, do not use bedrail to retain cargo.

• Retain cargo with the pickup tiedown hooks.

BED EXTENDER (IF EQUIPPED)

Your vehicle may be equipped with a bed extender designed to extend
the pickup box for larger loads.

To extend the bed extender:

1. Lower tailgate.

2. Pull the lever on each side of the
bed extender to release it from the
pickup box.

3. Lift the bed extender over onto
the tailgate.

4. Evenly push down on the bed
extender and push the lever in on
each side locking it in place.

To stow the bed extender, follow
steps one through four in reverse
order.

The bed extender may be used to
secure a load of up to 100 lb (46
kg) on the tailgate.

The bed extender should always
be kept in the stowed position with the tailgate closed when not
in use.

2008 Mark LT (mlt)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

113

Advertising