Heated seats (if equipped), Rear seats, Head restraints – Lincoln 2008 Mark LT User Manual

Page 139: Seating and safety restraints

Advertising
background image

• To program position two, repeat the previous procedure using control

2.

A position can only be recalled when the transmission gearshift is in
Park. A memory position may be programmed at any time.

Heated seats (if equipped)

Persons who are unable to feel pain to the skin because of
advanced age, chronic illness, diabetes, spinal cord injury,

medication, alcohol use, exhaustion, or other physical conditions, must
exercise care when using the seat heater. The seat heater may cause
burns even at low temperatures, especially if used for long periods of
time. Do not place anything on the seat that insulates against heat,
such as a blanket or cushion, because this may cause the seat heater
to overheat. Do not puncture the seat with pins, needles, or other
pointed objects because this may damage the heating element which
may cause the seat heater to overheat. An overheated seat may cause
serious personal injury.

Note: Do not do the following:
• Place heavy objects on the seat
• Operate the seat heater if water or any other liquid is spilled on the

seat. Allow the seat to dry thoroughly.

To operate the heated seats, do the following:
• Push control located on the

instrument panel to set at high
heat.

• Push control again to set at low heat.
• Push again to deactivate.
The indicator light on the control will illuminate when activated.

The system automatically shuts off after 10 minutes.

REAR SEATS

Head restraints

The purpose of these head restraints is to help limit head motion in the
event of a rear collision. To properly adjust your head restraints, lift the
head restraint so that it is located directly behind your head or as close
to that position as possible.

2008 Mark LT (mlt)
Owners Guide (post-2002-fmt)
USA
(fus)

Seating and Safety Restraints

139

Advertising