Livescribe PULSE - Manual (Page 79)

Chapter 10: 9BProduct Safety and Maintenance Page 79
Cleaning Your Pulse Smartpen
If your Pulse smartpen appears sluggish or non-responsive when you interact with printed
controls, the infrared lens at its tip may be dirty. Clean your IR lens with an alcohol wipe.
Clean the exterior of your Pulse smartpen with a clean, soft cloth dampened slightly with water.
Disposal
Do not dispose of this product in the trash. As with any product containing batteries, check with
your local waste or recycling company to determine the correct disposal method and location in
your area.
Hearing Notice
Long-term exposure to the playback of loud recordings, at high volume, may result in permanent
hearing loss. When using earbuds or headphones, it is recommended that recordings are
listened to at moderate volumes. Set the volume to a safe level. A rule of thumb is that the
recorded audio should not be so loud that you cannot hear people speaking to you.