Lucent Technologies 6402D - Manual (Page 24)

20
Line and Feature Button Lights
Feedback Tones (continued)
Tones Meaning
coverage One short burst of tone; indicates your call
will be sent to another extension to be
answered by a covering user.
dial A continuous tone; indicates dialing can
begin.
intercept/
time-out An alternating high and low tone; indicates
a dialing error, a denial of the service
requested, or a failure to dial within a
preset interval (usually 10 seconds) after
lifting the handset or dialing the previous
digit.
recall dial Three short bursts of tone followed by a
steady dial tone; indicates the feature
request has been accepted and dialing
can begin.
reorder A fast busy tone repeated 120 times a
minute; indicates all trunks are busy.
ringback A low-pitched tone repeated 15 times a
minute; indicates the number dialed is
being called.
Line and Feature Button Lights
Light Meaning
Steady red light next to
and next to
The red light next to lets you
know that the dial pad is now in
Feature selection mode. The red light
next to
means that the
one-way speaker is on.
Blinking red light next to You have put a call on hold. In order to
return to the call, press and then
release the switchhook.
Feature
Spkr
Feature
Spkr
Hold
230738i3.book Page 20 Thursday, July 8, 1999 3:40 PM