LOREX Technology DI-624 - Manual (Page 3)

© 2005 Strategic Vista International Inc. p.3
'clone' button. Click on the Static DHCP 'Enabled' radio button. Then click on the 'Apply' button to save this
configuration.
If your router does not support the Static DHCP feature, then you will want to set the IP Address explicitly.
Choose a new address value that is not already assigned and is outside of the range of the DHCP server to
avoid address conflict. (i.e. does not fall within the Starting and Ending IP Address). Use the new address in the
following setup. If you do re-assign the IP address, remember to also set it in the Lorex Monitor using the Lorex
Utility (see the manual on how to do this).
Step 1C: Create a data path from the Internet to the Lorex Monitor
Most routers have a way of setting up forwarding rules to allow external Internet client applications to access
devices on the LAN. In the case of the DLink-624 router select the 'Advanced' tab and you will see the following
screen;