LOREX Technology DI-624 - Manual (Page 8)

© 2005 Strategic Vista International Inc. p.8
Step 3B: Set up a password to secure your module
The connection that you currently have is suitable for use on a private Local Area Network. If you are concerned
that others can get access to your Lorex Monitor, you must enable password protection as follows;
In the left-hand panel, click on the 'User' option. The following screen will appear;
Enter in a user name and password to create a new user and click on 'Set/change'. Also, click on the 'admin'
name under the Current users list. Then enter in a new, secure, password for the administrator and click on the
'Set/change' button. Make sure you know what the passwords are and be VERY careful not to enter them
incorrectly! You will need these to access the module from now on. Note that these are different passwords
from the one used in step 2 to register with DDNS.
Under 'User authorization required', click on 'Yes' and then 'Set '.