LaCie DVD121 - Manual (Page 22)

LaCie Dupli Disc DVD121 USB 2.0
User Manual page 
Using Your LaCie Dupli Disc DVD121
The Select Source function is used to choose the
drive for the source data. The default source drive is the
top drive.
Note that even if you change the source drive, only
the top one can be used when connected in USB.
This menu option is not available with this model.
The Edit Track function was designed to create a
collection of audio tracks from various audio CDs onto
one CD. This model only features the CD to CD and
Close Session options.
Once the initialization is completed and the 1. x Copy
menu is displayed, press the Down Arrow on the con-
trol panel 9 times to scroll to the 10. Edit Track menu
option. Place the source audio CD into the source drive
and a blank CD-R or CD-RW into the target drive and
press the ENT button select this function.
CAUTION: Do not open the DVD±RW tray
while performing the Edit Track function. Doing so
may cause an error and may close the session of the
disc being recorded, rendering the disc unreadable.
7. Disc Info
After selecting this option, press the ENT button
and the following screen will appear:
10-01 . Edit Track
CD to CD Edit
Press the ENT button again and the screen will dis-
play this information:
Select Track:
1/10 03:25
In this screen, the “1/10” refers to the first of 10 au-
dio tracks, and the “03:25” refers to the length of the
audio track.
You can use the Down Arrow button on the control
panel to view additional tracks. Once the track that you
would like to add is displayed, press the ENT button. A
“+” will appear beside the selected track, as shown in the
following screen:
Select Track:
+1/10 03:25
CAUTION: Pressing the ENT button after the
track is selected will cancel the selected track.
4.8. “8. Select Source”
4.9. “9. Image”
4.10. “10. Edit Track”