Lennox Hearth MAGICOLOR 4650EN - Manual (Page 228)

Status, Error, and Service Messages 214
I-UNIT END
REPLACE
X
The X Imaging unit
has completely
reached the end of its
life. Replace the Imaging
unit.
I-UNIT MISSING
CHECK X
The X imaging unit is
not installed, or an
unapproved imaging
unit is installed. Install a correct KONICA
MINOLTA imaging unit.
TONER OUT
REPLACE X
The X toner cartridge
is completely empty. Replace the toner car-
tridge.
TONER MISSING
CHECK X
The X toner cartridge
is not installed, or an
unapproved toner
cartridge is installed. Install a correct KONICA
MINOLTA toner car-
tridge.
TRAY X EMPTY
“SIZE”
“MEDIA”
The X (Tray 1, 2 or 3)
was specified with the
printer driver for print-
ing, but Tray X is
empty. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF .
Load the correct media
into the specified tray.
TRAYX PAPER ERR
“SIZE”
“MEDIA”
The media size/type
set in the printer
driver is different from
the size/type of media
loaded. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF .
Load the correct media
size and type.
TRAYX SIZE ERR
ADD
“SIZE”
The media size set in
the printer driver is
different from the size
of media loaded. Load the correct media
size into the specified
tray.
This message... means... do this...