Lennox Hearth MAGICOLOR 4650EN - Manual (Page 27)

Selecting Driver Options/Defaults (for Windows) 13
"
If Printer Memory is selected, select 256 MB, 512 MB or 768 MB
according to the installed memory. The factory default setting is
256 MB.
"
If Memory Card is selected, select Disable, Enable (1 GB
Under), or Enable (1 GB Over), according to the installed Com-
pactFlash card.
7
Click Apply.
"
Depending on the version of the operating system, Apply may not
appear. If this is the case, continue with the next step.
8
Select the General tab.
9
Click Printing Preferences.
Printing Preference dialog box appears.
10
Select the default settings for your printer, such as the default media for-
mat you use, in the appropriate tabs.
11
Click Apply.
12
Click OK to exit from the Print preference dialog box.
13
Click OK to exit from the Properties dialog box.