LST BCnet216: 19" - Manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED BC216E_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
• Control panel modules in slide-in
technology, with/without power unit
• Centralized installation of up to 7
sectional control panels in a 19“ rack
• Flexibly expanable control panel
network for mid-sized/large systems
• Analogue ringbus technology with
unshielded detector cabling
• Addressable conventional technology
• EN 54/VdS-certifi ed
Fire is a permanent threat to life and property. There-
fore, immediate response to a fi re is imperative. The
main objective of the fi re detection control panel Series
BC216 is to alarm and to react in time and, conse-
quently, save lives and protect property. For decades
LST have focused their aims to undertaking unrivaled
efforts in order to realize new innovations in the security
area. Research, development and production are loca-
ted within LST premises, thus guaranteeing fl exible and
reliable individual solutions.
Using a 32-bit multiprocessor system, the fi re detection
control panel Series BC216 ensures topmost effi ciency
and speed – prerequisites for saving lives and minimi-
zing damage to property.
Description
The BCnet216 in 19“ slide-in technology is modularly
designed sectional control panel for mid-sized to very
large fi re detection control panels and consists of indivi-
dual fi re detection control panel modules. Each 19“ rack
RACK216-1E provides 7 slide-in positions. A maximum
of two fi re detection control panel modules with power
unit BCM216-3EPS and up to six fi re detection control
panel modules BCM216-3E or BCM216-3ELG, respec-
tively, can be installed in a rack (if two BCM216-3EPS
are used, the number of fi re detection control panel mo-
dules BCM216-3E or BCM216-3ELG, respectively, that
can be used is reduced to a maximum of four).
The control panel can easily be adapted to any required
system size and provides literally unlimited possibilities
also for future extensions.
All BCnet sectional control panels are connected with
each other via a redundant high-security network (the
Global Security System network GSSnet). Due to the
decentralized structure, the failure safety of the entire
system is signifi cantly improved compared to conventi-
onally designed fi re detection control panels.
The fi re detection control panel modules BCM216 -3EPS
and BCM216-3E each provide two slots for the connec-
tion of function modules (Conventional Detector Inter-
face GIF8-1 or Loop Interface LIF64-1) to which a total
of 16 detector lines in addressable conventional tech-
nology or a total of two ADM loops or a combination of
the both can be connected.
The Fire Detection Control Panel Module BCM216-3ELG
includes two integrated loop interfaces for the connec-
tion of two ADM loops.
The maximum expansion of a 19“ RACK216-1E with 7
slide-ins therefore amounts to 14 ADM loops or 112
conventional detector lines.
Easy parameterisation by means of PC software en-
ables you to optimally adapt the control panel to your
individual requirements.