Lightolier Power Connect RD Cable - Manual

POWER-CONNECT ™
RD CABLE
Page 1 of 2 LIGHTING DISTRIBUTION CABLES, “D” SERIES
APPLICATION DIMENSIONS
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902
OPTIONS/ACCESSORIES/Folio OA40-16
Features
• Pre-wired with female (power out) connector and fixture taps that
are #18 AWG TFN solid copper conductors, connected to “Poke-
Home” connectors. Opposite end has 6" leads and 1/2" K.O. connec-
tor for mounting to a junction box in a standard 1/2" (7/8" diameter)
knockout.
• Suitable for use in return air spaces above suspended ceilings in
accordance with 1999 N.E.C. 300-22 (c) and 604-3.
• Rated for 20 amp 120 and 277 volt lighting circuits.
• Connector polarized and color-coded for voltage function to prevent
mismating of components.
• #12 AWG THHN stranded copper, 600 volt.
• Pin and socket contacts.
• Meets UL requirements for making or breaking under load.
• I.B.E.W./UL and C-UL labeled.
3/4"
5/8" 2-5/16"
“D” Series Distribution cable distributes the lighting circuit(s)
to the first lighting fixture on the flexible wiring system from a
hardwired system.
It is quickly or easily field-installed by plugging ballast leads
into “Poke-Home” connectors, no wire nuts required.
Snaps into 1/2" knockout.
"D" Series distribution cables add a maximum of 7/8" to fixture
height, available in 1, 2 or 3 circuits.