Lightolier Power Connect RD Cable - Manual (Page 2)

POWER-CONNECT ™
RD CABLE
Page 2 of 2 LIGHTING DISTRIBUTION CABLES, “D” SERIES
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902
OPTIONS/ACCESSORIES/Folio OA40-16
Job Information Type:
SPECIFICATIONS
• UL and C-UL Listed.
• I.B.E.W. labeled.
• Suitable for use in return air spaces above suspended ceilings in accor-
dance with 1999 N.E.C. 300-22 (c) and 604.3.
• Meets UL requirements for making or breaking under load.
• Pin and socket contacts.
• Rated for 20 amp 120 and 277 volt lighting circuits.
• Connector polarized and color-coded for voltage function to prevent mismat-
ing of components.
• #12 AWG THHN stranded copper, 600 volt.
• Pre-wired with female (power-out) connector and fixture taps that are #18
AWHG TFN solid copper conductors, connected to “Poke-Home” connectors.
• Opposite end has 6" leads and 1/2" K.O. connector for mounting to a junc-
tion box in a standard 1/2" (7/8" diameter) knockout.
WIRING DIAGRAM WIRING
ORDERING INFORMATION
Explanation of Catalog Number. Example: LP–RD–12–1D–09
RD LP
TYPE:
RD =Lighting
Distribution
Cable
LOL POWER
CONNECT
WIRING
CONFIGURATION:
1D - 1 Circuit
2D - 2 Circuit
3D - 3 Circuit
ND - 2 Cir., 2 Neu. VOLTAGE:
12 - 120v
27 - 277v
LENGTH:
05 - 5'
09 - 9'
15 - 15'
25 - 25'
– – – –
ONE CIRCUIT
ONE CIRCUIT TAP TWO CIRCUIT TAP
TWO CIRCUIT TAP
TWO CIRCUIT
THREE CIRCUIT
(TYPICAL)
• Black lead to outboard ballast lead.
• Red lead to inboard ballast lead.
• White lead to white ballast leads.