Lenoxx Electronics CD-511 - Manual (Page 5)

IB-CD511(TA)-SW-E-091002
ATTACHING THE SPEAKERS
1.Position one of the speakers to the right
of the main unit.
2.Align the tracks (rails) on the speaker with
the main unit as shown in FIG. 1.
3.When the speaker tracks (rails) are lined
up, push the speaker into the tracks (rails)
on the main unit as shown in FIG. 2.
4.Repeat steps 1 to 3 above for the left side.
5.Carefully unwind the speaker wire from behind each speaker and insert the
right plug into Speaker Jack R and the left plug into Speaker Jack L (as shown
in FIG. 3). Wrap the remaining wire behind each speaker.
FIG.1
FIG.2
FIG.3
NOTE: This player can be used with the speakers either attached to the main unit
or standing alone so long as both speaker plugs are plugged into the
jacks.
4
LOCK TAB
To detach the speakers, press the lock tab and push the speakers out of
the tracks (rails).
PR O G.
PROG.