Linksys E3000 - Manual (Page 33)

30 High Performance Wireless-N Router
Linksys E3000 Chapter 3: Advanced Configuration
Add a Media Folder
Use this screen to add a media folder .
Media Folder
Media Folder
Display Name Create a name for the folder . This will
appear in the Database table on the Media Server screen .
Partition The name of the partition is displayed .
Location The location of the folder is displayed .
New Folder Type in a new folder name if you want to
create a new subfolder in the current location . Then click
Create .
Share entire Partition Select this option if you want to
share the entire partition with your UPnP AV devices . If
your disk doesn’t have multiple partitions, selecting this
option will share the entire disk . If you do not want to
share the entire partition, then select the folder you do
want to share .
Current Folder The current folder is displayed .
Folder Name The available folders are listed by Folder
Name .
Enter into Folder To display subfolders, click this button .
Select Select a folder .
Return to Upper Folder To return to the previous folder,
click this button .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes . Click Close to exit the
screen .
On the Media Server screen, click Save Settings to apply
your changes, or click Cancel Changes to clear your
changes .
Storage > FTP Server
The Storage options are available when a USB drive is
connected to the USB port of the Router .
The FTP Server tab creates an FTP server that can be
accessed from the Internet or your local network .
Storage> FTP Server
Setup
Server Name The default server name of the Router is
CiscoHotspotxxxxx .
FTP Server Select Enabled to use the Router as an FTP
server . Otherwise, select Disabled . An external USB hard
drive or USB disk must be connected to the USB port to
use this service .
Internet Access Select Enabled to allow access of the
FTP server from the Internet . Otherwise, select Disabled
to only allow local network access .
FTP Port Enter the FTP Port number to use . The default
is 21 .
Access
This section lets you add FTP folders that can be accessed
through the FTP client .
Specify Folder to Access To add an FTP folder to the
Access table, click this button . The FTP Folder screen
appears . Proceed to Create or Edit an FTP Folder,
page 30 .
Summary To view a list of FTP folders, click this option .
For each FTP folder, the Display Name, Partition, and
Folder location are displayed .
The database table lists the FTP folders with the following
information: Display Name, Partition, and Folder .
Edit To change the access settings of an FTP folder, click
this option, and the FTP Folder screen appears . Proceed to
Create or Edit an FTP Folder, page 31 .
Delete To delete an FTP folder, click this option .