Main menu – Linksys E3000 User Manual
Page 7
Linksys E3000
Chapter 2: Cisco Connect
4
High Performance Wireless-N Router
c . Unplug the existing Ethernet cable from your
computer and plug it into the yellow port labeled
Internet on the back of the Router . Click Next .
Reset
Internet
Ethernet
4
3
2
1
Power
12VDC
USB
Connect Ethernet Cable
NOTE:
You can view detailed connection steps
by clicking
in the setup software .
NOTE:
If the setup software detects multiple
routers, then select the serial number located
on the left side of the product label, which is on
the bottom panel of the Router .
5 . Please wait while the setup software is setting up the
Router .
Please Wait
6 . The installation is complete . Click OK .
Installation is Complete
NOTE:
If you have any problems during the
installation process, refer to the Frequently
Asked Questions (FAQs) in the setup software,
or use a computer with an active Internet
connection to .
Main Menu
When Cisco Connect starts up, the main menu appears:
Main Menu
The status of your Internet connection is displayed in the
upper right corner:
•
online secure
Your local network is secure, and your Internet
connection is available .
•
offline secure
Your local network is secure; however, your Internet
connection is not available . To repair your Internet
connection, follow the on-screen instructions .
NOTE:
A group of computers or other devices
connected to a router is a local network .
The router allows the networked devices to
communicate with each other .
The main menu offers four options: Computers and
devices, Parental controls, Guest access, and Router
settings .
NOTE:
To view the FAQs for more information,
click Need help?