Initial installation operating convenience, Positioning/aligning dvb-t antenna, General information on menu operation – Loewe Spheros R 37Full-HD+ User Manual

Page 13

Advertising
background image

13 -

Positioning/aligning DVB-T antenna

If you are receiving one or more DVB-T stations with picture and sound
interference then you should change the installation location and align-
ment of the antenna. Ask your dealer to tell you which channels are used
to broadcast the DVB-T stations in your region.

In normal TV mode, without other displays.

A DVB-T station is received and selected.

Call TV menu.

34

Select Settings,

6 go to the menu line below.

34

Select Stations,

6 go to the menu line below.

34

Select Manual adjustment,

OK call manual adjustment.

The signal source is already on DVB-T due to the station
preselection.

Position and align the antenna in such a manner that
maximum values for C/N and Level are obtained.

Blue button: Start search.

Search for DVB-T stations one after another and compa-
re values for C/N and Level.
Then position/align the antenna to the weakest station
so that maximum values for C/N and Level are obtained.

Thereafter perform an automatic search for all DVB-T
stations, see page 22.

Explanation of the setting possibilities:

Depending on the selected channel and country the
associated bandwidth of 7 or 8 MHz will be set auto-
matically.

Initial installation

Operating convenience

General information on menu operation

Use the MENU button to call menus for the various modes. Additional
menus can be called directly with the remote control.
The menus are displayed at the bottom of the screen. At the top you get
additional information about the selected menu item (see info display
on page 14).

In normal TV mode, without other displays.

Call TV menu.

Example: Selecting and executing functions

34

Select Picture,

6 go to the menu line below.

34 Select Brightness,
6 go to the menu line below.

34

Set Brightness.

 Go to the Brightness menu line

to make other picture settings.

34

Select more ... ,

OK call more ... functions.

34

Select Auto format,

6 go to the menu line below.

34

Select on / off.

Conclude the settings.

Inputs via numeric buttons

Letters have to be entered for specific functions. Like
using a mobile phone keypad (1 to 9), press a numeric
button until the desired character appears.
The available letters are imprinted on the individual
numeric buttons.

END

INFO

Sound

Connections

Recording

Settings

Picture

TV menu

Picture adjustment ...

Picture
Here you can adjust among other things: Contrast, colour, brightness, picture

adjustment, sharpness, picture format.

Bandwidth

END

INFO

Manual adjustment

Signal source DVB-T

DVB-C DVB-S A

Channel E05
Frequency 177.50 MHz
Bandwidth 7 MHz

Name 12 Test
C/N 96 Level 99

Overwrite station
Search

Signal source

Select the area in which you want the broadcaster to search here. You can

use the button to automatically select station by station.

Advertising
This manual is related to the following products: