Loewe Spheros R 37Full-HD+ - Manual (Page 19)

19 -
Daily operation
Adjusting the picture
Call TV menu.
34 Select Picture,
6 go to the menu line below.
34 Select the desired picture function,
6 go to the menu line below.
34 Make changes.
Explanations of the picture settings
Switches the picture parameters between standard and
personal values.
Adjust contrast.
Adjust the colour.
Set warmer or cooler tints for the picture.
Adjust the brightness of the picture.
Adjust the contour sharpness of the picture.
Removes or reduces the signal noise in the picture.
Call with OK.
Image improvement on/off and demo mode.
Setting possibilities for the picture format (see page 20).
Move picture vertically (see page 20).
With Auto format switched on, the TV set recognises the
picture format for Cinemascope or wide screen movies
and adapts accordingly.
Reduce image jolting.
Standard values / personal values for picture adjustment
Call TV menu.
34 Select Picture,
6 go to the menu line below.
34 Select Picture adjustment,
6 go to the menu line below.
34 Select desired values for picture,
OK call selected values for picture.
Explanations for picture adjustment
Custom adjustments of contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise supression are saved in the per-
sonal values. There are separate personal values for every signal source
(TV analog, TV digital, HD analog, HD digital, PC, PhotoViewer).
By selecting Standard values the picture parameters are reset to factory
values for the respective currently active signal source.
For an explanation of the signal source; see glossary: Signal input
groups.
In the index of the TV set, all the picture and sound adjustments can be
reset to the factory values for all signal sources in one step under Reset pic-
ture/sound or Initialise picture/sound or Factory settings picture/sound.
Operation without remote control
Changing the station on the TV set
+ / – Station up/down.
Switching radio on or off or switching to radio
R Radio on / off or switching between TV and radio.
Calling the TV menu on the set
➠ Service is for customer service personnel only.
M call Direct control on TV set menu,
– / + select function.
M or R go to the menu line below,
– / + make changes.
M move up one menu line,
– / + select other function.
Brightness Volume
Direct control on TV set
19
Contrast Picture format Station AV selection
END INFO
Sound Connections Recording Settings Picture
TV menu
Picture adjustment ...
Picture
Here you can adjust among other things: Contrast, colour, brightness, picture
adjustment, sharpness, picture format.
END INFO
Contrast Colour temperature Colour intensity Picture adjustment
Picture (standard values, TV digital)
TV menu
Picture adjustment
Here, you can switch between the preset standard values for contrast, colour
intensity, colour temperature, brightness, focus and digital noise reduction
and your own personal values. Each of the signal input groups „TV analogue“,
„TV digital“, „HD analogue“, „HD digital“, „PC“ and „PhotoViewer“ has its own
values. Refer to printed operating manual.
Standard values (TV digital) ...
END INFO
OK
Picture adjustment
Picture (personal values, TV digital)
TV menu
Standard values (TV digital) Personal values (TV digital)
Picture
adjustment
Contrast
Colour intensity
Colour
temperature
Brightness
Sharpness
DNC
more ...
Image+
Picture format
Vertical
picture hold
Auto format
DMM