Lowrance electronic GlobalMap 100 - Manual (Page 39)

33
SELECTING A WAYPOINT
In order to edit or navigate to a waypoint, you must first
select it. There are three ways to do this: by waypoint
number, waypoint list, or search by name. All selection
methods are on the main waypoint menu shown at right.
Waypoint Number
To select a waypoint by its number, simply highlight
the “WPT” label at the top of the waypoint menu, then
press the left or right arrow keys until the desired way-
point number appears.
Waypoint List
The waypoint number selection method forces you to
scroll through all waypoint numbers, whether there’s a
location saved in them or not. The waypoint list is com-
posed only of saved waypoints. To use the list, select
“WPT LIST” from the waypoint menu. The screen shown
at right appears. The names of all waypoints stored in
memory show on this list. Simply highlight the desired
waypoint and press the right arrow key to select it. The
waypoint menu reappears.
(Note: When created, a waypoint is given a default name designated by
an asterisk (*). Default names are not shown on the map. The waypoint
number is shown until it’s renamed.)
EDITING A WAYPOINT
You can customize a waypoint by giving it a name or change it’s position
or icon. To do this, first press the WPT key. The waypoint screen appears.
Follow the instructions below for each item.
Edit Position
Any latitude/longitude can be assigned to any waypoint
by manually entering it using the keyboard. First se-
lect the waypoint number that you want to save a po-
sition under from the waypoint menu. Next, highlight
“EDIT POSITION” and press the right arrow key. The
screen shown at right appears. Using the left and right
arrow keys, highlight each number in the position and
change it using the up and down arrow keys. When
you’re ready to save this position and return to the way-
point screen, press the ENT key. Note: You can also
use this method to change the position of an existing waypoint.