LevelOne IP Power Switch IPS-0008 - Manual (Page 24)

3. From the Connect using
drop-down box, select the
COM port that you have
connected to the IPS-0008.
Click OK when done.
4. The Properties window opens.
Click Restore Defaults to use
the default settings. Make sure
that the Bits per second field is
set to 9600. Click OK when
done.
5. Press any key. The IPS-0008
Configuration Utility Main
menu opens and you are
prompted for a pass- word.
Type the default password
(admin) and press Enter to
continue.
20