Lincoln Electric WELD-PAK 3200HD - Manual (Page 33)

C-1 ACCESSORIES C-1
OPTIONAL ACCESSORIES
1. K664-2 Aluminum Feeding Kit — This kit
required for welding with .035 Aluminum wire.
Included with this kit are a drive roll, liner and con-
tact tip.
It is important when changing between
welding with steel wire and aluminum to
exchange these components due to the lubri-
cant applied to steel wire. Failure to do so may
result in contaminated welds when welding alu-
minum.
2. KP665-045C Drive Roll – Optional — Knurled
drive roll for feeding .035 (0.9 mm) diameter flux-
cored electrode.
3. K520 Utility Cart — Designed to transport the
Lincoln family of small welders. Has provisions for
mounting a single gas cylinder. Has front casters
and large rear wheels. Handle height is easily
adjustable. Bottom tray provided for tools and
accessories. Easy assembly required; takes less
than 15 minutes.
4 . K586-1 Deluxe Adjustable Gas Regulator &
Hose Kit
Accommodates CO2 or mixed Gas Cylinders.
WELD-PAK 3200HD