Panasonic DMR-EZ17 - Manual (Page 32)

32
RQT8850
Accessing the Setup menu
With the unit stopped
e, r to select a menu
then q to go to the item list.
Setup
Channel
Setup
Disc
Video
Audio
Display
TV Screen
Channel Settings
Closed Caption
Audio Language Setting
Channel Settings
Signal Source (Antenna / RF IN)
Set Channels Automatically
TAB
ENTER
SELECT
RETURN
Cable
Menus Items Options
e, r to select an item to change
then
e, r to select an option
then
Some options require different operations;
follow the on-screen prompts. –
Notes
Changed settings remain intact even when switching the unit to
standby.
Tips
To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change is
not activated until you press [ENTER].
To exit the screen
Press [SETUP].
•
Summary of Settings
All factory default settings are indicated with
“Underlined” text.
Channel
Signal Source (Antenna / RF IN)
Select to suit the type of antenna you are using.
[Antenna] [Cable]
Set Channels Automatically
Channel Settings (➔ 46)
Closed Caption (➔ 35)
[Set]: Choose whether to show closed captions.
[Analog]: Settings for closed captions in analog broadcasts.
[Digital]: Settings for closed captions in digital broadcasts.
[Digital Setting]: Detailed settings for closed captions.
[CC reset]: Resets settings for closed captions.
For details ( ➔ 35, Setting the Closed Caption) •
Audio Language Setting
Select the preferred digital broadcast language.
[English] [French] [Spanish]
Setup
Off Timer
Select how long the unit remains on when it is not being used.
[2 Hours] [6 Hours] [Off]
Remote Control Code (➔ 55)
[Set Code 1] [Set Code 2] [Set Code 3]
Clock Settings
Press [ENTER] to show the following settings.
Set Clock Automatically (➔ 47)
Set Clock Manually (➔ 45)
Set the time change dates for DST (➔ 45)
Set the beginning and end dates for DST.
Adjust Time Zone (➔ 47)
This corrects the time set in Auto Clock Setting.
The status is not displayed on the Setup menu when the Auto
Clock Setting is not set.
[–1] [0] [1]
Quick Start
1 Sec. Quick Start for Recording on DVD-RAM.
From the power off state, recording on DVD-RAM starts about
1 second after first pressing [^ DVD POWER] and then
sequentially pressing [* REC] (Quick Start Mode).
Power consumption is also higher when the unit is turned off if this
is set to “On”.
[On] [Off]
Restore Default Settings
This returns Setup menus to default settings, except for the clock,
channel settings, ratings level, closed caption, and on-screen
language.
[Yes] [No]
Changing the Unit’s Settings