Panasonic DMR-EZ17 - Manual (Page 8)

8
RQT8850
Scheduled Recording
Refer to “Advanced Scheduled Recording” ( ➔ 15) for detail information on scheduled recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
• Turn on the television and select the appropriate video input to suit the
connections to this unit.
• RAM If the disc is protected, release protection ( ➔ 27).
• Insert a disc with enough remaining blank space.
• Confirm that the clock on the unit’s display is set to the correct time.
• If connected via a cable box or satellite receiver, set channel there
before scheduled recording starts.
CANCEL S SUB MENU Timer Off A
Schedule list Remaining Recording Time
3/26 Tue 12:53 PM
1:58 SP DVD
Channel No
Press ENTER to set new schedule.
Date On
New Scheduled Recording
Off Mode Check
ENTER
e, r to select “New Scheduled Recording”,
then
w, q to move through the items and e, r to set
the items.
Channel/Input – TV Station/External Input
Date/Frequency – You can set a daily or weekly program.
On (start time) / Off (end time)
– Hold button to change in 30-minute increments.
Mode – Recording mode
Name – Press [ENTER], see page 21.
Channel, Caption
Preview of selected
channel
S SUB MENU
SCHEDULED
RECORDING
Channel/
Input
Date/
Frequency
--------
On
--:-- --
Off
--:-- --
Mode
--
ENTER
RETURN
Name
Number -- 0 9
4-1
4-1 KPO-SD
Remaining Recording Time
3/26 Tue 12:53 PM
1:58 SP DVD
Cancel
Set Channel/Input.
Repeat steps 2−4 to program other recordings. –
when you have finished programming.
“z” lights on the unit’s display. –
Notes
Be sure to perform step 5 before the
scheduled recording time. Scheduled
recording will work only if “z” is
displayed.
“z” flashes when the unit cannot go to
scheduled recording standby. (e.g., a
recordable disc is not in the disc tray)
It does not flash if Quick Start is off.
When scheduled recordings are set to
start one immediately after another, the
unit cannot record the beginning of the
later program.
If two scheduled recording times
overlap, the first recording always has
priority. The second recording will start
only after the first recording has finished
When starting time for a scheduled
recording is the same, the recording that
you programmed later has priority.
If you set DST (Daylight Saving Time)
to On when manually setting the clock,
scheduled recording may be affected
when summer time switches to winter
time and vice versa. •
•
•
•
•
•
Tips
Icons such as “ RAM ” indicate usable
discs. Refer to pages 52 and 53.
•