Panasonic CQ-5250U - Manual (Page 11)

11
Sound Controls
CQ-5250U
SQ (Sound Quality)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music type.
Press [SQ] for more than 2 seconds to select the sound type as
follows:
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(VOCAL) clear sound:
emphasizes middle tone and slightly
emphasizes treble.
(FLAT) flat frequency response:
does not emphasize any part.
(default)
Audio Modes (Bass/Treble/Balance/Fader)
1
Push [SEL] to select the audio mode.
Note: If no operation takes place for more than 5 seconds in audio
mode (2 seconds in volume mode), the display returns to the regular
mode.
2
Turn [VOLUME] clockwise or counterclock-
wise to change each level.
(Setting Range: –12 dB to +12 dB by 2 dB,
default: 0 dB)
(Setting Range: –12 dB to +12 dB by 2 dB,
default: 0 dB)
(Setting Range: 15 levels each and 0 (center),
default: CNT)
(Setting Range: 15 levels each and 0 (center),
default: CNT)
(Setting Range: 0 to 40, default: 18)
q: Increased
w: Decreased
q: Increased
w: Decreased
q: Right enhanced
w: Left enhanced
q: Front enhanced
w: Rear enhanced
q: Up
w: Down
(Bass)
(Volume)
(Treble)
(Balance)
(Fader)
SQ indicator