Panasonic CQ-5250U - Manual (Page 20)

20
CQ-5250U
Installation (continued)
Mounting and removing the Main Unit
❏ Mounting Procedures
(When using Mounting Collar q)
1
2
3
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other model.
Insert Mounting Collar q into the
dashboard, and bend the mounting
tabs out with a screwdriver.
Establish the rear connection of the unit.
After fixing Power Connector, fix the rear of the
unit to the vehicle body by either method (a) or (b)
shown in the next page.
After installation reconnect the negative
(–) battery terminal.
The tabs to be bent vary depending on
the vehicle. To securely install the
unit, fully bend a number of the tabs
so that there is no rattling.
Example:
Tab
q Mounting
Collar
Mounting Holes
Mounting Bolt
Power Connector
Mounting springs (C)
Engage the Mounting
Springs (C) in the
mounting holes of
the Mounting Collar
q firmly.
Mounting Spring
Mounting
Hole