Pioneer SUPER TUNER AVIC-Z110BT - Manual (Page 152)

Category Mode
1 2 3
4
5
6
a 9 7 8
1 Memorize the current song
= For details, refer to Memorizing the song
on the next page.
2 Switch the SIRIUS Instant replay mode
= For details, refer to Using the “Instant
Replay ” function on page 154.
3 Display the “Function” menu
= For details, refer to Using the “Function”
menu on page 154.
4 Recalling channels from the preset
Touch to recall the preset channel.
5 Perform manual tuning
The channels move up or down one at a
time.
p If you keep touching [c] or [d] you can
skip the broadcasting channels.
6 Select a SIRIUS band
Touch [ Band] repeatedly until the desired
SIRIUS band is displayed, SIRIUS 1,
SIRIUS 2, or SIRIUS 3. This is useful for
switching the preset.
7 Preset key for receiving the traffic
audio service
= For details, refer to Using the direct traffic
announcement function on the next
page.
8 Switch the SIRIUS channel select
mode
You can switch the mode between the two
methods for selecting and listing the chan-
nel.
All Ch Mode:
You can select a channel from all channels
when you operate this function.
Category Mode:
You can select a channel within a selected
category that you operate this function.
9 Select a SIRIUS channel directly
= For details, refer to Selecting a SIRIUS
channel directly on this page.
a Switch the SIRIUS display
Each touch of [ Disp] changes the display
information.
Channel number
— Channel name —
Channel category
— Artist name/feature —
Song/program title
— Composer
b Switch the channel category
Touch [c] or [d] to select the desired cate-
gory.
Selecting a SIRIUS channel directly
You can select a SIRIUS channel directly by
entering the desired channel number.
1 Touch [Direct].
2 Touch [0] to [9] to input the desired
channel number.
To cancel the input numbers, touch
.
3 While the input number is displayed,
touch [Enter].
The SIRIUS channel that was entered se-
lected.
4 Touch .
You return to the previous display.
Display the Radio ID
If you select CH: 000, the Radio ID is dis-
played.
1 Touch [Direct].
2 Input [000] and then touch [Enter].
If you select another channel, display of the
Radio ID is canceled.
Using the SIRIUS tuner
En
152
Chapter
28