Pioneer SUPER TUNER AVIC-Z110BT - Manual (Page 162)

— When the navigation outputs the gui-
dance voice.
— When you use a cellular phone via Blue-
tooth technology (dialing, talking, in-
coming call).
— When the voice recognition mode is ac-
tivated.
! Tel/VR — The volume is muted or attenu-
ated according to the following conditions
— When you use a cellular phone via Blue-
tooth technology (dialing, talking, in-
coming call).
— When the voice recognition mode is ac-
tivated.
! Off — The volume does not change
p Operation returns to normal when the cor-
respond action is ended.
Switching the muting/
attenuation level
You can select the muting/attenuation level of
[
Mute]. This setting is also effective for a mute
signal that has been received from the MUTE
lead connected to the navigation unit.
p This menu is not available when AV source
is [ Off].
% Touch [Mute Level] on the “AV System
Settings
” menu.
Each touch of [ Mute Level] changes the set-
tings as follows:
! 20dB — The volume becomes 1/10
! 10dB — The volume becomes 1/3
! All — The volume becomes 0
p When you select [All], no audio adjust-
ments are possible during the sound is
turned off.
p When you select [20dB] or [10dB], no audio
adjustments are possible during the sound
is attenuated.
p Operation returns to normal when the cor-
respond action is ended.
p Even when a mute signal has been received
from MUTE lead connected to the naviga-
tion unit, navigation voice guidance cannot
be attenuated or muted.
Changing the voice output of
the navigation guidance
You can set the speaker to output the naviga-
tion guidance and phone voice, etc.
% Touch [Guidance/Tel SP] on the “AV Sys-
tem Settings
” menu.
Each touch of [ Guidance/Tel SP] changes the
settings as follows:
! L+R SP — Uses both the front right and left
speakers
! Left SP — Uses only the front left speaker
! Right SP — Uses only the front right speak-
er
Acquiring/Cataloging iPod
music information
If you always set the language other than
“Eng-
lish
” on “Voice Language”, this setting is un-
necessary.
Unless [ VR Catalog Mode] is turned off, this
navigation system tries to acquire the informa-
tion needed to operate iPod with voice com-
mands. It may take a short period of time to
transfer the information. Change the setting
according to your usage.
The navigation system starts acquiring/catalo-
ging music information (1) when the iPod is
connected or when the system boots up while
the iPod is connected and (2) when iPod is the
selected and displayed AV Source, unless [
VR
Catalog Mode] is turned off.
p This function is available when [Change
Control Mode] is set to [Navi].
p If you do not use iPod, this setting is un-
necessary.
p During transfer, iPod operations (such as
[ Shuffle], [MENU], or [Video]) are not
available.
Customizing preferences
En
162
Chapter
32