Panasonic MC-V120 - Manual (Page 28)

- 28 - - 13 -
Power Motor Protector Height Adjust Cord Length
120V AC (60Hz) Yes Auto 50 Ft. (15.25m)
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Voltaje Protector de Adjust de nivel Extensión
motor de cordón
120V AC (60Hz) Si Auto 15,25 m (50 pi)
Alimentation Protecteur Réglage de la Cordon
du moteur hauteur des brosses d’alimentation
120 V c.a. (60 Hz) Oui Auto 15,25 m (50 pi)
Cleaning Agitator
➢ ➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ ➢ Remove lower plate.
➢ ➢ Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
➢ ➢ Remove agitator.
➢ ➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ ➢ Reinstall agitator and lower plate.
Replacing Agitator
➢ ➢ When the bristles on the agitator are
worn so that they do not touch a card
held across the lower plate, the
agitator should be replaced.
➢ ➢ Remove lower plate and agitator.
➢ ➢ Position belt over belt pulley on the
new brush unit.
➢ ➢ Reinstall agitator and lower plate.
Card
Carte
Tarjeta
End Cap
Belt
Pulley
Brush
Unit
End Cap
Washer
Agitator Assembly