Panasonic PT-DW7000U - Manual (Page 92)

92
How to use network function (optional)
Enter the E-mail address to
which the E-mail is to be sent
when two E-mail addresses
are going to be used. Do not
enter it when the second E-
mail address is not going to
be used.
Select the conditions for sending E-mail.
ERROR: an error is detected by self-diagnosis.
LAMP1 RUNTIME: remaining lamp service time has reached the value set in
the field.
LAMP2 RUNTIME: remaining lamp service time has reached the value set in
the field.
INPUT AIR TEMPERATURE: intake air temperature has reached the value
set in the field.
OUTPUT AIR TEMPERATURE: exhaust temperature has reached the value
set in the field.
Check these boxes when E-
mail is to be sent periodically
to two E-mail addresses. E-
mail will be sent at the times
and on the days checked.
Button to update settings
DNS server set up page
Click [Network set up], then [DNS server set up] to display the DNS server set up page.
Button to update settings
Primary DNS server
address
Available input characters:
Numbers (0 - 9), period (.)
(ex. 192.168.0.253)
Secondary DNS server
address
Available input characters:
Numbers (0 - 9), period (.)
(ex. 192.168.0.254)