PYLE Audio PLINV3 User Manual
Page 8
Advertising
SYMPTOM C: THE LOW OUTPUT OF INVERTER IS MEASURED
7
POSSIBLE CAUSES
SUGGESTION
Battery voltage is too low below 10V DC
Recharge battery
The inverter is overload
Reduce load to 150 Watts (PINV1) , 300
Watts (PINV2) and 400 Watts (PINV3)
maximum to maintain regulation.
SYMPTOM D: THE LOW BATTERY IS MEASURED
POSSIBLE CAUSES
SUGGESTION
The poor battery condition
Recharge battery
Inadequate power of excessive voltage drop
Check condition of battery clips and
terminals. Clean or replace as necessary
Advertising