Panasonic CF-W8 - Manual (Page 118)

118
Troubleshooting (Advanced)
• If the power indicator is blinking or is not lit:
The standby or hibernation is entered. Slide the power switch.
z Disconnect the external display before checking a disk error ( Î page 109 ) or before using commercially available parti-
tioning software. If you run this software with the external display still connected, in some cases, nothing will be displayed
on the screen. If this occurs, wait until the process is complete and the screen display returns.
z The display destination may be set to the external display.
Try changing the display destination by pressing Fn+F3.
If you want to switch the display destination repeatedly by pressing Fn+F3, make sure that the display destination has
switched completely each time before pressing Fn+F3 again.
z The screen may become darker. Press Fn+F2 to make the screen brighter.
z The screen remains dark, if the computer is resumed through either USB device, wired LAN or wireless LAN.
Press a key with no independent effect, such as Ctrl or Shift.
Do not use a key that may make a selection (Enter, Space, Esc, Y, N, numeric keys, and so on).
z <Only for CF-T8 Series>
When the display is rotated and the screen saver starts, the screen may go black for approximately 1 minute, depending
on the type of screen saver. Change the type of screen saver.
There is an afterimage
z Display a different screen.
If the same screen is displayed for a long time, this may leave an afterimage.
The screen becomes disordered
z The screen display may become distorted if the resolution or number of colors is changed, or if an external display is con-
nected or disconnected while the computer is operating. Restart the computer.
Switching between internal and external displays does not work
z The display destination cannot be switched while a video such as an MPEG file and a DVD Video are playing. Stop playing
the video before switching the display destination.