Pittsburgh Corning 95840 User Manual
Page 3
Page 3
SKU 95840-95841
for technical questions, please call 1-800-444-3353.
use only 1/2” (95841) or 3/8” (95840) sockets with the torque capability shown
in the specifications chart on prior page. Otherwise, the socket could fly off the
drive anvil or break apart, causing injury.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Keep children away while operating the Digital torque Wrench. Keep children
out of the work area.
stay alert. Do not operate the Digital Torque Wrench while tired or under the influ-
ence of drugs, alcohol, or medication.
Do not overload the Digital torque Wrench. Use the correct tool for your applica-
tion. Do not use it for applications other than intended.
Maintain the torque Wrench with care. Do not use a damaged Torque Wrench.
Tag a damaged Torque Wrench “Do not use” until repaired.
torque Wrench service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk
of injury.
When servicing the torque Wrench, use only identical replacement parts. Fol-
low instructions in the “Inspection and Maintenance” section of this manual.
use eye and ear protection. Always wear ANSI-approved impact safety goggles
and hearing protection.
Do not use cheater bars or hammers to force the torque Wrench.
Do not use the torque Wrench to break a fastener loose.
always pull a torque Wrench towards you. Pushing the Torque Wrench may
force it past its maximum capacity and increase the risk of losing control, which
may cause injury.
Maintain tools with care. Make certain that the Torque Wrench has a fresh bat-
tery. Inspect the Torque Wrench periodically and, if damaged, have it repaired by
an authorized technician.
Do not expose this product to rain or wet conditions. Water entering a Digital
Torque Wrench will damage it.
Do not use the torque Wrench:
If the battery is low
Near any explosive gasses or fumes
If any abnormal operation is detected (if in doubt about the condition of the
Torque Wrench have it serviced)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
a.
b.
c.