PLUS Vision U2-1130 - Manual (Page 13)

E – 11
C o n n e c t i n g v i d e o e q u i p m e n t
You can connect up to two pieces of video equipment to the unit following the illustrations below.
• You can switch the input source (picture) to VIDEO or S-VIDEO when you connect two pieces of equipment.
(The S-VIDEO connection provides more vivid color and higher resolution compared to the VIDEO connection.)
• You can output the sound of only one component through the unit speaker even when two components are connected.
Before connecting
• Turn off the components that are to be connected.
• The unit and computer will be turned on in “Using the unit” on page 15. Do not turn on either the computer or the unit until you read this
section.
• Please also refer to the manual of the video component to be connected.
C o n n e c t i o n s
PC AUDIO RGB IN MOUSE AUDIO S-VIDEO VIDEO
L/MONO R
PC AUDIO RGB IN MOUSE AUDIO S-VIDEO VIDEO
L/MONO R
Connection to the VIDEO jack
of the unit
To video output jack
The unit's terminal panel
S-video cable
(supplied)
Connection to the S-VIDEO jack
of the unit
The unit's terminal panel
(L) (R)
(L) (R)
(L) (R)
(L) (R)
Red Yellow White
Red Yellow White
White Red
White Red
DVD player, laser disc player,
VCR, document camera, etc.
DVD player, laser disc player,
VCR, document camera, etc.
Audio/video cable (supplied)*
To audio output jacks
* If the equipment to be connected to the unit is a
monaural type, connect to the L/MONO jack of
the unit.
To S-video output jack
* If the equipment to be connected to the unit is a
monaural type, connect to the L/MONO jack of
the unit.
Audio/video cable (supplied)*
To audio output jacks