PLUS Vision U2-1130 - Manual (Page 23)

E – 21
Enlarged size Original size
Cursor key
POINTER button
MAGNIFY button
PLUS
VIDEO
RGB
MENU
R-CLICK
LASER
MAGNIFY KEYSTONE VOLUME
S-VIDEO
POINTER MUTE FREEZE
+
–
+ –
+
–
+
–
OFF ON POWER
Enlarging the picture after selecting the
portion you wish to enlarge
After selecting the portion you wish to enlarge, you can enlarge the
picture up to four times the original size.
1
While the picture is projected at its
original size, press POINTER.
The button lights in red, then the pointer is dis-
played on the screen.
If you don’t proceed to step 2 within ten seconds,
the button goes off.
Note
You can also display the pointer on the menu screen. See page
25.
You can select from among eight pointers using the menu. See
page 25.
2
Press the desired portion of the cursor
key to move the pointer while POINTER is
lit.
The available directions are indicated by the
eight triangle marks on the cursor key. The
pointer will move in the direction of the mark you
are pressing.
POINTER POINTER
Original size
3
Press MAGNIFY +.
While the button is pressed, the picture is
enlarged until it becomes four times the original
size.
Note
The quality of the enlarged picture deteriorates compared to
the original size picture.
To reduce the size of the enlarged picture
Press MAGNIFY –.
While the button is pressed, the picture is
reduced until it becomes the original size.
Original size
MAGNIFY
+
–
Original size
MAGNIFY
+
–
Four times as large
as the original size