Panasonic TC-20LA1H - Manual (Page 16)

16
Press at any time to go back to watching TV
(please read the Note in the above procedure).
TUNING MENU
AUTO TUNE
Before AUTO TUNE, set the “CH SELECT” and “SYS SELECT”.
Follow the step on the previous page to display the TUNING MENU screen.
1 Press to select AUTO TUNE.
Press to access AUTO TUNE.
Notes:
• If you proceed with the next step all tuning data will be erased (all stations
and their programme positions stored in your TV's memory will be wiped
out so that the new settings can be stored).
• If you exit the procedure after this point and before AUTO TUNE is complete,
no station information will be stored. Restart and complete the AUTO TUNE
procedure so that the TV is re-tuned.
SYS SELECT
MANUAL TUNE
SOUND SYS
COLOUR SYS
5.5MHz
SKIP OFF
AUTO
ASIA/M. EAST
CH SELECT DIRECT
ACCESS
FINE TUNE
TUNING MENU
AUTO TUNE
CH 29
29
AUTO SETUP IN PROGRESS
SEARCHING :
SETUP : RETURN TO TUNING MENU
TV/AV : TO EXIT
STORED CH29
2 Press to start AUTO TUNE.
Once this operation is completed the TV will display the program now stored
on programme position 1.
TV/AV
STR F TV/AV
AUTO TUNE (via top panel)
1 Press
F
(Top panel) until Tuning mode is reached.
2 Press or to access Tuning mode.
3 Press
F
(Top panel) to access Auto tune.
4 Press or to start search.
Press
F
at any time to exit the Tuning menu.
It is also possible to use the control panel buttons on the top of the TV to tune individual programme positions
Helpful Hint
1. If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the
“Colour System” selection on page 15.
2. After the Automatic tune is finished, press the Programme Number “Up” Button to confirm the tuning condition
for each Programme Number. If some Programme Numbers are unused, it is possible to skip such Programme
Numbers. Please refer to the Programme SKIP function on page 15.
03.10.29, 5:46 PM Page 16