Manual tune, Manual tune (via top panel), Helpful hint – Panasonic TC-20LA1H User Manual

Page 17: Tuning menu

Advertising
background image

17

MANUAL TUNE

Before MANUAL TUNE, set the “CH SELECT” and “SYS SELECT”.
Follow the step on page 15 to display the TUNING MENU screen.

1

Press to select MANUAL TUNE.

Press to access MANUAL TUNE.

2

Press to select the desired Programme Number.

Press to search the higher or lower channel.

3

When the desired station is found, press to store.
The programme position will flash.

Press at any time to go back to watching TV.

TUNING MENU

TV/AV

STR

SYS SELECT

SOUND SYS
COLOUR SYS

5.5MHz

SKIP

OFF

AUTO

ASIA/M. EAST

CH SELECT

DIRECT

FINE TUNE

TUNING MENU

AUTO TUNE

ACCESS

MANUAL TUNE

E X I T

RETURN

TV/AV

SEARCH – /+

PROGRAMME – /+

BUTTON STORE

’STR’

MANUAL TUNE

CH 2

2

STR

F

TV/AV

MANUAL TUNE (via top panel)

1 Press

F

(Top panel) until Tuning mode is reached.

2 Press

or

to access Tuning mode.

3 Press

F

(Top panel) until Manual tune is reached.

4 Press

TV/AV

to move between Change programme, Search and

Change TV system.

5 Press

or

to change programme position or start search.

When the desired station is found, press

STR

to store.

The programme position will flash.
Repeat above procedure to tune additional programme
positions.

Press

F

at any time to exit the Tuning menu.

It is also possible to use the control panel buttons on the top of the TV to tune individual programme positions

Helpful Hint

1. If a clear picture cannot be obtained even when a Broadcast or AV signal is received, refer to the “Colour

System” selection on page 15.

2. After the Manual tune is finished, press the Programme Number “Up” Button to confirm the tuning condition for each

Programme Numbers. If some Programme Numbers are unused, it is possible to skip such Programme Numbers.

3. When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable

as indicated in the instruction manual of VCR and to set the designated channel to programme No.“0”. In that
case, perform manual tune after setting the colour system and sound system in advance. Further, in multi-
system VCR, it is more convenient to set the designated channel to several programme Numbers.

CH 2

5.5 MHz

2

MANUAL TUNE

– / + : SEARCH
TV/AV : MOVE CURSOR
STR : TO STORE

F : TO EXIT

STR

F

- /

+ /

TV / AV

03.10.29, 5:46 PM

Page 17

Advertising
This manual is related to the following products: