Panasonic SB-ZT2 - Manual (Page 4)

VQT2T88
4
-If you see this symbol-
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact
your local authorities or dealer and ask for the
correct method of disposal.
Speci
fi cations/Product
Service
Product Service
1. Damage requiring service — The unit should be serviced by
qualifi ed service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change
in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing to
authorized servicing personnel.
3. Replacement parts — When parts need replacing ensure the
servicer uses parts specifi ed by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fi re, electric shock, or other hazards.
4. Safety check — After repairs or service, ask the servicer to perform
safety checks to confi rm that the unit is in proper working condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the
entire system.
For product information or assistance with product operation:
In the U.S.A. and Puerto Rico, refer to “Customer Services Directory
(United States and Puerto Rico)” on page 5.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre
at 1-800-561-5505, or visit the website (www.panasonic.ca), or an
authorized Servicentre closest to you.
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
User memo:
The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.
MODEL NUMBER
SERIAL NUMBER
Specifi cations
g POWER AMPLIFIER SECTION ∗1
RMS output power
10 % total harmonic distortion
Woofer Speaker ch 60 W (100 Hz, 3 Ω)
Mid High Speaker ch 20 W (1 kHz, 8 Ω)
System Total Power ∗2 160 W (80 W x 2)
FTC output power
1.0 % total harmonic distortion
50 Hz to 250 Hz Woofer Speaker ch 37 W (3 Ω)
250 Hz to 20 kHz Mid High Speaker ch 13 W (8 Ω)
System Total Power ∗2 100 W (50 W x 2)
g SPEAKER SECTION ∗1
2-way 5 speakers system (Bass reflex type)
Woofer part 12 cm cone type x 1
Mid High part 2.4 x 10 cm flat type x 4
g SPEAKER GENERAL ∗1
Power supply AC 120 V, 60 Hz
Power consumption 20 W
Wireless Link Standby 0.8 W
In Standby condition 0.1 W
Dimensions ( W x H x D ) 290 mm x 1231 mm x 290 mm
(11-13/32" x 48-15/32" x 11-13/32")
Mass [ Weight ] Approx. 3.9 kg (8.6 lb.)
Operating temperature range 0°C to 40°C (32°F to 104°F)
Operating humidity range 20 % to 80 % RH (no condensation)
g WIRELESS SECTION
Frequency of the using band 2.4000 GHz to 2.4835 GHz
Number of using channels 3
The reaching distance 15 m (49 ft) ∗3
∗1: per 1 speaker
∗2: use 2 speakers
∗3 It is under the condition as follows.
At same room indoor, there is not an obstacle between the
main unit and the speaker.
And installing a main unit in the position with equal to or more
than 50 cm height.
Note: 1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital
spectrum analyzer.
3. Total harmonic distortion is measured by using AES17
filter.
Product information
5$<622
8366 A'PAKPFF 5$<622
8366 A'PAKPFF