Panasonic RQT9633-4P - Manual (Page 11)

11
RQT9633
EN
GL
IS
H
Sound adjustment
The following sound effects can be added to the
audio output.
1
Press [SOUND] repeatedly to select the effect
and then press [OK].
2
Press [3, 4] to select the setting and then
press [OK].
*1: This function can also be selected with the [D.BASS]
button on the unit.
≥ You may experience a reduction in sound quality when
these effects are used with some sources. If this occurs,
turn the sound effects off.
Clock and Timer
This is a 12-hour clock.
1
Press [SETUP] repeatedly to select “CLOCK”
and then press [OK].
2
Press [3, 4] to set the time and then press
[OK].
≥ To display the clock, press [SETUP] repeatedly to select
“CLOCK” and then press [OK] once. The time is
displayed for 10 seconds.
(During standby, press [iPod MENU, DISPLAY] once.)
≥ The clock is reset when there is a power failure or when
the AC power supply cord is removed.
≥ Reset the clock regularly to maintain accuracy.
You can set the timer so this unit turns on at a
certain time every day.
Preparation
Set the clock (> left).
∫ Setting the timer
1
Press [SETUP] repeatedly to select
“TIMER ADJ” and then press [OK].
2
Press [3, 4] to set the starting time
(“ON TIME”) and then press [OK].
3
Press [3, 4] to set the finishing time
(“OFF TIME”) and then press [OK].
≥ To display the timer settings, press [SETUP] repeatedly to
select “TIMER ADJ” and then press [OK] once.
(During standby, press [iPod MENU, DISPLAY] twice.)
≥ The music source and volume will also be displayed if the
timer is turned on. (> below)
∫ Turn the timer on
1
Select the music source* 2 and set the desired
volume.
2
Press [SETUP] repeatedly to select
“TIMER SET” and then press [OK].
3
Press [3, 4] to select “SET” and then press
[OK].
≥ “ F” is displayed.
4
Press [Í] to turn the unit off.
*2: “CD”, “IPOD” and “FM” can be set as the music source.
≥ This unit can be used as normal after the timer is set,
however:
≥ Turn the unit to standby mode before the timer start time.
≥ Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
≥ To turn the timer off, select “OFF” in step 3.
≥ The unit will turn on at the preset time, with the volume
increasing gradually to the preset level.
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] repeatedly to select “SLEEP”
and then press [OK].
2
Press [3, 4] to set the time (in minutes) and
then press [OK].
“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”
^----------------------. OFF (Cancel) (----------------------J
≥ The remaining time is indicated on the unit’s display except
when other operations are performed.
≥ The play timer and sleep timer can be used together. The
sleep timer always has priority.
Direct-Vocal
Surround
(D.SURROUND) “LEVEL 1”, “LEVEL 2” or
“OFF”.
≥ The factory preset is “OFF”.
Preset EQ
(PRESET EQ) “HEAVY” (heavy), “SOFT”
(soft), “CLEAR” (clear),
“VOCAL” (vocal) or “FLAT”
(flat/off).
≥ The factory preset is “HEAVY”.
Bass (BASS) or
Treble (TREBLE) Adjust the level (j4 to i4).
Dynamic Bass* 1
(D.BASS)
“ON D.BASS” or
“OFF D.BASS”.
≥ The factory preset is
“ON D.BASS”.
Setting the clock
Play timer
Sleep timer
SC-HC37~RQT9633.book 11 ページ ２０１２年２月２８日 火曜日 午後３時４３分