Pioneer DV-585A-s - Manual (Page 13)

Connecting up 02
13
En
Compatibility of this player with
progressive-scan and high-definition TVs
This player is compatible with progressive
video Macro Vision System Copy Guard.
Consumers should note that not all high-
definition television sets are fully compatible
with this product and may cause artifacts to be
displayed in the picture. In case of 525/625
progressive scan picture problems, it is
recommended that the user switch the
connection to the ‘standard definition’ output
(Interlace). If there are questions regarding our
TV set compatibility with this model, please
contact our customer service center.
This player is compatible with the following
Pioneer displays and monitors:
PDP-505HDE, PDP-435HDE
Connecting to an AV receiver
You can connect this player to your AV receiver
using the multichannel analog outputs or one
of the digital outputs.
In addition to these connections, you should
also connect the 2 channel analog outputs for
compatibility with all discs.
You’ll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
1 Connect the analog AUDIO OUT 2ch
and VIDEO OUTPUT jacks on this player to
a set of analog audio and video inputs on
your AV receiver.
2 Connect the AV receiver’s video output
to a video input on your TV.
The diagram shows standard video connec-
tions, but you can alternatively use the S-Video
or component video connections if they’re avail-
able.
You can use the SCART AV connector, or the S-
video or component video jacks to connect to
the AV receiver if you prefer.
Tip
• You usually have to connect the same kind
of video cable between your DVD player
and AV receiver, and between your AV
receiver and TV.
S-VIDEO OUT AUDIO OUT (5.1ch) COMPONENT VIDEO OUT AUDIO OUT (2ch)
VIDEO OUT
P R
P B
Y
SL
SR SW
C
L
L
R
R
AV receiver AUDIO/
VIDEO IN
DV585A WY_Mid.book Page 13 Tuesday, April 5, 2005 6:35 PM