Pioneer DV-585A-s - Manual (Page 35)

Initial Settings menu 07
35
En
Video Output settings
Linear PCM Out Down Sample On 96kHz digital audio is converted to 48kHz for digital output.
Note that High sampling rate DVD-Audio discs (192kHz or
176.4kHz) automatically output down-sampled audio through
the digital outputs.
Down Sample Off 96kHz digital audio is output as is at 96kHz.
MPEG Out MPEG > PCM MPEG encoded digital audio is converted to PCM audio for
digital output.
MPEG MPEG encoded digital audio is output as is.
Setting Option What it means
TV Screen
(See also Screen sizes
and disc formats on
page 45.)
4:3 (Letter Box) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide) Set if you have a widescreen TV.
Component Out Interlace Set if your TV is not compatible with progressive scan video.
Progressive Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). See also
Switching
the video output to interlace using the front panel controls on
page 12.
Note that progressive scan video is only output from the
component video jacks.
AV Connector Out Video Ordinary (composite) video output, compatible with all TVs.
RGB If your TV is compatible, this setting gives the best picture
quality.
Note that there is no output from the component jacks when
this setting selected.
Setting Option What it means
DV585A WY_Mid.book Page 35 Tuesday, April 5, 2005 6:35 PM