Pioneer S-DV4T - Manual (Page 15)

Listening to your system 03
15
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 3
Listening to your system
Auto listening mode
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
• If you set up the system for Front surround
(page 10), the Front Surround modes will
give the best results.
• Press SURROUND to select the AUTO
listening mode. 1
Listening in surround sound
You can listen to stereo or multichannel
sources in surround sound. 2 Surround sound
is generated from stereo sources using one of
the Dolby Pro Logic decoding modes.
• If you set up the system for Front surround
(page 10), the Front Surround modes will
give the best results.
• Press SURROUND repeatedly to select a
listening mode. 1
The choices that appear in the display will vary
according to the type of source that’s playing.
• AUTO – Auto listening mode (see above)
• DOLBY PL (Dolby Pro Logic) – 4.1 channel
surround sound (use with any two-channel
source)
• MOVIE (Dolby Pro Logic II Movie) – Pro
Logic II 5.1 channel surround sound,
especially suited to movie sources (use
with any two-channel source)
• MUSIC (Dolby Pro Logic II Music) – Pro
Logic II 5.1 channel surround sound,
especially suited to music sources (use
with any two-channel source)
• STEREO – See Listening in stereo below
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode, there are three settings you can adjust:
Center Width, Dimension, and Panorama.
1 With Dolby Pro Logic II Music mode
active, press SOUND.
2 Use / to select ‘C WIDTH’, ‘DIMEN.’ or
‘PANORAMA’ then press ENTER to confirm.
• C WIDTH (Center Width) – Provides a
better blend of the front speakers by
spreading the center channel between the
front right and left speakers, making it
sound wider (higher settings) or narrower
(lower settings).
• DIMEN. (Dimension) – Adjusts the depth
of the surround sound balance from front
to back, making the sound more distant
(minus settings), or more forward (positive
settings).
• PANORAMA – Extends the front stereo
image to include the surround speakers for
a ‘wraparound' effect.
Note
1 If the source is Dolby Digital or DTS, the corresponding indicator lights in the front panel display.
2 Note that when the tuner is selected, multichannel playback is not possible.
TEST TONE MCACC
SURROUND SOUND ADVANCED
TUNE
F.S.SURR
TEST TONE MCACC
SURROUND SOUND ADVANCED
TUNE
F.S.SURR
HTZ363DVD_EN_WL.book 15 ページ ２００７年２月３日 土曜日 午後３時１３分