Additional information 10, Resetting the system, Using the language code list – Pioneer S-DV4T User Manual
Page 48
Additional information
10
48
En
Resetting the system
Use the front panel controls to reset all system
settings to the factory default.
•
With the system on, press
STANDBY/
ON while holding down
USB.
The next time you switch on, all the system
settings should be reset.
Using the language code list
Some of the language options (see Language
settings on page 30) allow you to set your
preferred language from any of the 136
languages in the Language code list below.
1
Select ‘Other Language’.
2
Use
/ to select either a code letter or
a code number.
3
Use
/ to select a code letter or a code
number.
See the Language code list below for a
complete list of languages and codes.
EEP ERR
• Contact your Pioneer authorized service center or your dealer for servicing.
EXIT
• Appears when a menu is automatically exited after a set period of inactivity.
Message
Description
HTZ363DVD_EN_WL.book 48 ページ ２００７年２月３日 土曜日 午後３時１３分