Panasonic DX-800 - Manual (Page 19)

Pre Installation Information
19
Ge
tting t
o
K
n
ow
Y
our
M
ac
h
ine
For the total system to work properly via LAN, certain information and additional parameters must be set.
Please contact your network administrator for the required information and connection to the LAN.
Important: Make a copy of this page and ask the Network Administrator to complete the required
information. After its returned, transfer the information to the back side of the front cover of this
manual for future reference and troubleshooting.
NOTE 1. Items in Bold, depict information obtained from you Network Administrator.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP and POP Server Names (items 3 and 7 above). If the DNS Server is not available,
change the Fax Parameter No. 161 (DNS SERVER) to "1:Invalid". Then the machine will
prompt you to enter the IP Address of the SMTP and POP Servers.
3. If required, the MAC Address of your machine can be obtained from the Fax Parameter List
printout, by pressing .
User Information
Company Name
Address
Dept.
City
State Zip Code
Tel. No. Fax No.
Internet Parameters (See page 49 )
(1) IP Address:
(2) Subnet Mask:
(3) Default Gateway IP Address:
(4) Primary DNS IP Address:
(5) Secondary DNS IP Address:
(6) Email Address:
(7) SMTP Server IP Name :
or *SMTP Server IP Address:
(8) POP Server Name: or *POP Server IP Address:
(9) POP User Name:
(10) POP Password:
(11) LDAP Server Name:
or LDAP Server IP Address
(12) LDAP Log In Name:
(13) LDAP Password:
(14) LDAP Search Base:
(15) Host Name:
(16) Default Subject:
(17) Default Domain:
(18) Selectable Domains:
1. 6.
2. 7.
3. 8.
4. 9.
5. 10.
(19) Remote Password:
(20) Relay XMT Password:
(21) Manager’s Email Address:
(22) Relay Domains (Domains Authorized for Relay Transmission):
1. 6.
2. 7.
3. 8.
4. 9.
5. 10.
(23) Community Name (1):
(24) Community Name (2):
(25) Device Name:
(26) Device Location:
FUNCTION 6 4 SET