Pioneer Elite VSX-90TXV - Manual (Page 11)

Connecting your equipment 03
11
En
Chapter 3:
Connecting your equipment
This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This page explains the
kinds of components you can connect to make up your home theater system.
Rear panel
Caution
• Before making or changing the connections, switch
off the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
1 HDMI connectors (x3)
Two inputs and one output for high-quality audio/video
connection to compatible HDMI devices.
 Connecting using HDMI on page 15.
2 XM Radio input
 See Using XM Radio on page 44.
3 Coaxial digital audio inputs (x2)
Use for digital audio sources, including DVD players/
recorders, digital satellite receivers, CD players, etc.
 See also The Input Assign menu on page 55 to assign
the inputs.
4 Optical digital audio output/input(s) (x4)
Use the OUT jack for recording to a CD or MiniDisc
recorder.
 Connecting digital audio sources on page 16.
Use the
IN jacks for digital audio sources, including DVD
players/recorders, digital satellite receivers, CD players,
etc.
 See also The Input Assign menu on page 55 to assign
the inputs.
5 Control input/output
Use to connect other Pioneer components so that you
can control all your equipment from a single IR remote
sensor.
 Operating other Pioneer components with this unit’s
sensor on page 65.
6 Stereo analog audio source inputs/(outputs) (x3)
Use for connection to audio sources such as CD players,
tape decks, turntables, etc.
 Connecting analog audio sources on page 17.
7 Remote input (MULTI-ZONE and source)
Use for connection to an external remote control sensor
for use in a MULTI-ZONE setup, for example.
 Connecting an IR receiver on page 52.
8 Component video connections (x4)
Use the inputs to connect any video source that has
component video output, such as a DVD recorder. Use
the output for connection to a monitor or TV.
 Using the component video jacks on page 14.
9 iPod input terminal
Use to connect your Apple iPod as an audio source.
 Connecting an iPod on page 43.
10 Audio/video source inputs/(outputs) (x6)
Use for connection to audio/visual sources, such as DVD
players/recorders, VCRs, etc. Each set of inputs has jacks
for composite video, S-video and stereo analog audio.
 Connecting a DVD/HDD recorder, VCR and other video
sources on page 14.
SPEAKERS
OUTLET
R L R L
R
FRONT CENTER SURROUND SURROUND BACK
IN IN IN OUT OUT
DVR/VCR1 DVR/VCR2
L CENTER
SWITCHED 100 W(0.8 A) MAX
CENTE
DVR/VCR1 DVR/VCR2
119 1
VSX-90TXV_KU.book Page 11 Friday, March 16, 2007 5:46 PM