Pelican PL-2006 - Manual (Page 10)

8
TROUBLE SHOOTING
If you are having difficulties with your new Eclipse
Wireless Controller please refer below:
My system turns on but I don’t see anything on the TV.
1. Check to verify that your A/V cable is properly
connected to your system.
2. Check to verify that your A/V cable is properly
plugged into your television set.
My Eclipse does not respond.
1. Check to verify that your batteries are inserted
correctly. Please refer to page 4 for more details
on inserting the batteries.
2. Check to verify that the On / Off switch is in the
‘On’ position or the ‘Rumble Off’ position if you do
not wish to use Rumble.
3. Check to verify that the controller and
Receiver / Transmitter unit are on the same
channel. Please refer to page 5 for more details.
http://www.pelicanperformance.com
For technical questions please visit
or call us directly at 1-800-331-3844
ENGLISH