Pelican PL-2006 - Manual (Page 5)

3
PRODUCT OVERVIEW
Eclipse Wireless Controller uses advance technology
which gives you the ability to play without the limitations
of a typical corded controller, hence there are a few
switches and LED (lights) not found on your basic
Xbox™ Controller.
• Channel Switch (Receiver and Controller):
This switch selects the broadcast channel of the radio
frequency. There are four positions; 1, 2, 3 and 4.
There is a corresponding Channel Switch on the
receiver.
• Band Switch (Receiver and Controller):
This switch selects the bandwidth. There are two
positions; A and B. There is a corresponding
Band Switch on the receiver.
• Power Switch (Controller):
This switch selects the power mode. There are 3
positions; Off, On, and Rumble Off.
OTHER FEATURES:
Multiple Players:
You may play with up to four Eclipse Wireless
controllers. Check to see that the channel switches
are set as outlined above.
Power Save Mode:
When not in use the Eclipse Wireless controller
automatically goes into a sleep mode to conserve
batteries. A touch of any button puts the controller
back into play mode.
Note: Turn off the controller when not in use to
extend your battery life.