P3 International P3 E9310 - Manual (Page 5)


3. Safety Instructions
We shall not assume any liability for damage to items or persons caused
by improper handling or non-observance of the safety instructions!
In such cases, any guarantee claims shall become null and void.
- Do not use this product in hospitals or medical institutions. Although
the outdoor sensor only emits relatively weak radio signals, these may
cause interference to life-support systems. The same can also apply
in other areas.
- Do not use the unit, if there is damage to the housing.
- Do not subject the device to temperatures below 32˚F (0°C) or above
158˚F (70°C).
- Caution: Freezing can cause damage! Take the unit out of the water, if
the temperature goes to 32˚F (0˚C).
- For safety and licensing reasons (FCC), it is not permitted to convert
or modify the product.
- Do not leave the packaging material laying around. Plastic foil and
bags, polystyrene parts etc. are dangerous in the hands of children.
- This product is not a toy. It contains glass and small parts. Children
can be injured by swallowing them. Use the unit out of the reach of
children.
- This product is not a toy for pets. It contains glass and small parts..
Pets can be harmed if they or play with the unit.
• Batteries do not belong in the hands of children.
• Observe the right polarity when inserting the batteries.
• Do not leave batteries laying around. Pets or small children may swallow
them. If they are swallowed, contact a doctor immediately.
• Leaking or damaged batteries may lead to injury to the skin. For this
reason, use suitable protective gloves when changing them.
• Make sure that batteries or rechargeable batteries are not thrown into
the fire or short-circuited. There is a likelihood of explosion!
• Never dismantle batteries!
• Do not recharge normal batteries. There is a risk of explosion!
• If the product is not used for longer periods of time (e.g. in case of sto-
rage), please remove the inserted batteries in order to prevent damage
caused by leaking batteries.
4. Battery and environment instructions