Pontiac Vibe Navigation System Supplement - Manual (Page 38)

3-5
Tone: Use the control pad, located at the bottom, left
corner of the navigation system, to access the following
settings. To move between TREB, MID, and BASS or
on the next page between BAL, FADE, and SCV. Use
the control pad to move each setting to the desired level.
EQ (Equalizer): While in the audio menu, use the keys
labeled EQ1 through EQ5 to choose preset bass,
midrange and treble equalization settings. The Custom
key allows you to choose and set the equalization levels
you desire. Move the arrows on the control pad up or
down to select and highlight the audio setting and use
the left or right arrows to adjust the audio setting.
After adjustments are made, press the BAND hard key
to go back to the preset station menu. Now that you have
preset the station and the EQ setting, you can assign the
EQ to the preset station. To do this, press and hold the
desired preset station key until you hear a beep. The EQ
setting will now be assigned to that station until you
decide to change it.
If you were at the CD screen before setting an EQ and
you press the CD hard key, you will be returned to the
CD screen and the EQ will be set to that screen until you
decide to change it.
Radio Data Systems (RDS)
Your audio system is equipped with a Radio Data
System (RDS). Using RDS, the radio can do the
following:
D Seek only to stations broadcasting the selected type
of programming,
D seek to stations with traffic announcements,
D receive announcements concerning local and
national emergencies, and
D display messages from radio stations.
RDS features are only available on FM stations that
broadcast RDS information. The RDS features on your
radio rely on receiving specific RDS information from
these stations. These features will only work when the
RDS information is available. In rare cases, a radio
station may broadcast incorrect information that will
cause the radio features to work improperly. If this
happens, contact the radio station.
While you are tuned to an RDS station, the station name
will appear on the display. RDS stations may provide a
program type (PTY) for current programming and the
name of the program being broadcast.